Difference between revisions of "Tool Manuals and Specifications"

From Deep Blue Robotics Wiki
Jump to: navigation, search
(→‎Delta 28-400 Band Saw)
 
(48 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
[[Category:Work_On]]
 +
 
A place to store manuals and specs of all major power tools in the shop. This page is specifically constructed so fixing broken tools does not require an exhaustive search of the manual or parts. Please add to this page as new tools get added to the shop
 
A place to store manuals and specs of all major power tools in the shop. This page is specifically constructed so fixing broken tools does not require an exhaustive search of the manual or parts. Please add to this page as new tools get added to the shop
 +
 +
'''BOLD''' denotes specifications most likely needed for repair and maintenance
  
 
Problems? Contact ericliu121@yahoo.com
 
Problems? Contact ericliu121@yahoo.com
  
 
==Jet JWBS-14CS Band Saw==
 
==Jet JWBS-14CS Band Saw==
 +
[[File:Jet JWBS-14CS Band Saw Image.jpg|x225px|left|thumb]]
 +
 
[https://drive.google.com/open?id=0B0iW3hNWLDfeMEZ0UHdoS2h6Y0k Operating Instructions and Parts Manuel]
 
[https://drive.google.com/open?id=0B0iW3hNWLDfeMEZ0UHdoS2h6Y0k Operating Instructions and Parts Manuel]
  
Line 9: Line 15:
 
!colspan="2"|Specifications
 
!colspan="2"|Specifications
 
|-
 
|-
−
|Blade Length (in)
+
|'''Blade Length (in)'''
−
|93-1/2
+
|'''93-1/2'''
 
|+
 
|+
 
|Minimum Blade Width (in)
 
|Minimum Blade Width (in)
Line 32: Line 38:
  
 
==Jet JSG 0810 Air Riveter==
 
==Jet JSG 0810 Air Riveter==
 +
[[File:Jet JSG 0810 Air Riveter Image.jpg|x137 px|left|thumb]]
 +
 
[https://drive.google.com/open?id=0B0iW3hNWLDfeUjNxTlFHN3QtR1E Operating Manuel and Parts List]
 
[https://drive.google.com/open?id=0B0iW3hNWLDfeUjNxTlFHN3QtR1E Operating Manuel and Parts List]
  
Line 45: Line 53:
 
|Possible Rivet Sizes (in)
 
|Possible Rivet Sizes (in)
 
|3/32, 1/8, 5/32, 3/16
 
|3/32, 1/8, 5/32, 3/16
 +
|+
 +
|'''Hydraulic Oil'''
 +
|'''10 WT'''
 
|}
 
|}
  
 
==Delta 48ALFCCW402 Laser Drill Press==
 
==Delta 48ALFCCW402 Laser Drill Press==
−
[[File:Delta 48ALFCCW402 Laser Drill Press Image.jpg|x300 px|thumb|Delta 48ALFCCW402 Laser Drill Press]]
+
[[File:Delta 48ALFCCW402 Laser Drill Press Image.jpg|x250 px|left|thumb|]]
  
 
[https://drive.google.com/open?id=0B0iW3hNWLDfeM1R2T2VqWHVRYkk Instruction Manuel]
 
[https://drive.google.com/open?id=0B0iW3hNWLDfeM1R2T2VqWHVRYkk Instruction Manuel]
  
 
[https://drive.google.com/open?id=0B0iW3hNWLDfebHFCZ1ZNYnBLeWc Specification Sheet]
 
[https://drive.google.com/open?id=0B0iW3hNWLDfebHFCZ1ZNYnBLeWc Specification Sheet]
 +
 +
{| class="wikitable"
 +
!colspan="2"|Specifications
 +
|-
 +
|Speed Range (RPM)
 +
|170-3000
 +
|+
 +
|'''Spindle Taper'''
 +
|'''Morse #2'''
 +
|+
 +
|'''Chuck Taper'''
 +
|'''Jacobs #3'''
 +
|+
 +
|Table Size (in)
 +
|20 x 14
 +
|+
 +
|Max Drilling Capacity (height/in)
 +
|42-1/2
 +
|+
 +
|Key Chuck Capacity (in)
 +
|5/8
 +
|+
 +
|Motor
 +
|3/4HP
 +
|}
  
 
==Delta 28-400 Band Saw==
 
==Delta 28-400 Band Saw==
−
[[File:Delta 28-400 Band Saw Image.jpg|x300 px|thumb|Delta 28-400 Band Saw]]
+
[[File:Delta 28-400 Band Saw Image.jpg|x225 px|left|thumb]]
 +
 
 
[https://drive.google.com/open?id=0B0iW3hNWLDfeRTd1UXI0cThHZlE Instruction Manuel]
 
[https://drive.google.com/open?id=0B0iW3hNWLDfeRTd1UXI0cThHZlE Instruction Manuel]
  
Line 61: Line 98:
 
!colspan="2"|Specifications
 
!colspan="2"|Specifications
 
|-
 
|-
−
|Blade Length (in)
+
|'''Blade Length (in)'''
−
|93-1/2
+
|'''93-1/2'''
 
|+
 
|+
 
|Minimum Blade Width (in)
 
|Minimum Blade Width (in)
Line 84: Line 121:
  
 
==Delta 23-197 Variable Speed Grinder==
 
==Delta 23-197 Variable Speed Grinder==
−
[[File:Delta 23-197 Variable Speed Grinder Image.jpg|300 px|thumb|Delta 23-197 Variable Speed Grinder]]
+
[[File:Delta 23-197 Variable Speed Grinder Image.jpg|x200 px|left|thumb]]
 +
 
 
[https://drive.google.com/open?id=0B0iW3hNWLDfeOGVaMXF5NlNDNWc Instruction Manuel]
 
[https://drive.google.com/open?id=0B0iW3hNWLDfeOGVaMXF5NlNDNWc Instruction Manuel]
 +
 +
{| class="wikitable"
 +
!colspan="2"|Specifications
 +
|-
 +
|'''Wheel Diameter (in)'''
 +
|'''8'''
 +
|+
 +
|'''Wheel Thickness (in)'''
 +
|'''1'''
 +
|+
 +
|'''Wheel Grit'''
 +
|'''36 (coarse) and 60 (medium)'''
 +
|+
 +
|Wheel Speed (RPM)
 +
|2000-3400
 +
|+
 +
|Shaft Diameter (in)
 +
|5/8
 +
|+
 +
|Motor
 +
|5 AMP, 120V, 1-Phase
 +
|}
  
 
==DeWalt DW715 Compound Miter Saw==
 
==DeWalt DW715 Compound Miter Saw==
−
[[File:DeWalt DW715 Compound Miter Saw Image.jpg|300px|thumb|DeWalt DW715 Compound Miter Saw]]
+
[[File:DeWalt DW715 Compound Miter Saw Image.jpg|x175px|left|thumb]]
  
 
[https://drive.google.com/open?id=0B0iW3hNWLDfeRXRIV24zYzZBRTA Instruction Manuel]
 
[https://drive.google.com/open?id=0B0iW3hNWLDfeRXRIV24zYzZBRTA Instruction Manuel]
 +
 +
{| class="wikitable"
 +
!colspan="2"|Specifications
 +
|-
 +
|'''Blade Diameter (in)'''
 +
|'''12'''
 +
|+
 +
|'''Blade Arbor Hole Size (in)'''
 +
|'''1'''
 +
|+
 +
|'''Blade Minimum Speed Rating (RPM)'''
 +
|'''4800'''
 +
|+
 +
|Blade Type
 +
|Crosscut Blades Only!
 +
|+
 +
|Motor
 +
|15 AMP, 120V, 1600W Max
 +
|}
  
 
==Porter Cable PCB420SA Belt/Disc Sander==
 
==Porter Cable PCB420SA Belt/Disc Sander==
 +
[[File:Porter Cable PCB420SA Belt-Disc Sander Image.jpg|x225px|left|thumb]]
 +
 
[https://drive.google.com/open?id=0B0iW3hNWLDfeYnVxdDJSRlQycHc Instruction Manuel]
 
[https://drive.google.com/open?id=0B0iW3hNWLDfeYnVxdDJSRlQycHc Instruction Manuel]
  
Line 98: Line 179:
 
!colspan="2"|Specifications
 
!colspan="2"|Specifications
 
|-
 
|-
−
|Belt Size (in)
+
|'''Belt Size (in)'''
−
|4 x 36
+
|'''4 x 36'''
 
|+
 
|+
 
|Belt Speed (no load-feet/min)
 
|Belt Speed (no load-feet/min)
Line 107: Line 188:
 
|6-11/16 x 4-15/16
 
|6-11/16 x 4-15/16
 
|+
 
|+
−
|Disc Size (diameter-in)
+
|'''Disc Size (diameter-in)'''
−
|8
+
|'''8'''
 
|+
 
|+
 
|Disc Speed (no load-rotations/min)
 
|Disc Speed (no load-rotations/min)
Line 121: Line 202:
  
 
==Ryobi BD 4600 Belt/Disc Sander==
 
==Ryobi BD 4600 Belt/Disc Sander==
 +
[[File:Ryobi BD 4600 Belt-Disc Sander Image.jpg|x225px|left|thumb]]
 +
 
[https://drive.google.com/open?id=0B0iW3hNWLDfeVlJfUGV0dHpBS2c Operator's Manuel]
 
[https://drive.google.com/open?id=0B0iW3hNWLDfeVlJfUGV0dHpBS2c Operator's Manuel]
  
Line 126: Line 209:
 
!colspan="2"|Specifications
 
!colspan="2"|Specifications
 
|-
 
|-
−
|Belt Size (in)
+
|'''Belt Size (in)'''
−
|4 x 36
+
|'''4 x 36'''
 
|+
 
|+
 
|Belt Speed (no load-surface feet/min)
 
|Belt Speed (no load-surface feet/min)
Line 135: Line 218:
 
|none
 
|none
 
|+
 
|+
−
|Disc Size (diameter-in)
+
|'''Disc Size (diameter-in)'''
−
|6
+
|'''6'''
 
|+
 
|+
 
|Disc Speed (no load-rotations/min)
 
|Disc Speed (no load-rotations/min)
Line 149: Line 232:
  
 
==Shop Fox M1015 Mini Lathe==
 
==Shop Fox M1015 Mini Lathe==
 +
[[File:Shop Fox M1015 Mini Lathe Image.jpg|x200px|left|thumb]]
 +
 
[https://drive.google.com/open?id=0B0iW3hNWLDfed1JKT0p1S0t6U2s Instruction Maneul]
 
[https://drive.google.com/open?id=0B0iW3hNWLDfed1JKT0p1S0t6U2s Instruction Maneul]

Latest revision as of 06:23, 11 November 2016


A place to store manuals and specs of all major power tools in the shop. This page is specifically constructed so fixing broken tools does not require an exhaustive search of the manual or parts. Please add to this page as new tools get added to the shop

BOLD denotes specifications most likely needed for repair and maintenance

Problems? Contact ericliu121@yahoo.com

Jet JWBS-14CS Band Saw

Jet JWBS-14CS Band Saw Image.jpg

Operating Instructions and Parts Manuel

Specifications
Blade Length (in) 93-1/2
Minimum Blade Width (in) 1/8
Maximum Blade Width (in) 3/4
Table Size (in) 15 x 15
Cutting Capacity (height/in) 6
Cutting Capacity (width/in) 13-1/2
Motor 3/4HP, 115/230V

Jet JSG 0810 Air Riveter

Jet JSG 0810 Air Riveter Image.jpg

Operating Manuel and Parts List

Specifications
Recommended Operating Pressure (psi) 90
Air Inlet Size (in) 1/4
Possible Rivet Sizes (in) 3/32, 1/8, 5/32, 3/16
Hydraulic Oil 10 WT

Delta 48ALFCCW402 Laser Drill Press

Delta 48ALFCCW402 Laser Drill Press Image.jpg

Instruction Manuel

Specification Sheet

Specifications
Speed Range (RPM) 170-3000
Spindle Taper Morse #2
Chuck Taper Jacobs #3
Table Size (in) 20 x 14
Max Drilling Capacity (height/in) 42-1/2
Key Chuck Capacity (in) 5/8
Motor 3/4HP

Delta 28-400 Band Saw

Delta 28-400 Band Saw Image.jpg

Instruction Manuel

Specifications
Blade Length (in) 93-1/2
Minimum Blade Width (in) 1/8
Maximum Blade Width (in) 3/4
Table Size (in) 15-3/4 x 18-7/8
Cutting Capacity (height/in) 6
Cutting Capacity (width/in) 13/5/8
Motor 1HP, 120V

Delta 23-197 Variable Speed Grinder

Delta 23-197 Variable Speed Grinder Image.jpg

Instruction Manuel

Specifications
Wheel Diameter (in) 8
Wheel Thickness (in) 1
Wheel Grit 36 (coarse) and 60 (medium)
Wheel Speed (RPM) 2000-3400
Shaft Diameter (in) 5/8
Motor 5 AMP, 120V, 1-Phase

DeWalt DW715 Compound Miter Saw

DeWalt DW715 Compound Miter Saw Image.jpg

Instruction Manuel

Specifications
Blade Diameter (in) 12
Blade Arbor Hole Size (in) 1
Blade Minimum Speed Rating (RPM) 4800
Blade Type Crosscut Blades Only!
Motor 15 AMP, 120V, 1600W Max

Porter Cable PCB420SA Belt/Disc Sander

Porter Cable PCB420SA Belt-Disc Sander Image.jpg

Instruction Manuel

Specifications
Belt Size (in) 4 x 36
Belt Speed (no load-feet/min) 2160
Belt Worktable (in) 6-11/16 x 4-15/16
Disc Size (diameter-in) 8
Disc Speed (no load-rotations/min) 3450
Disc Worktable (in) 10-25/64 x 5-29/32
Motor 5 AMP, 120V, 3/4HP, Induction

Ryobi BD 4600 Belt/Disc Sander

Ryobi BD 4600 Belt-Disc Sander Image.jpg

Operator's Manuel

Specifications
Belt Size (in) 4 x 36
Belt Speed (no load-surface feet/min) 1900
Belt Worktable (in) none
Disc Size (diameter-in) 6
Disc Speed (no load-rotations/min) 3600
Disc Worktable (in) 8-1/2 x 5-3/4
Motor 4.3 AMP, 120V, 1/2HP, Induction

Shop Fox M1015 Mini Lathe

Shop Fox M1015 Mini Lathe Image.jpg

Instruction Maneul

Retrieved from "http://wiki.carlmontrobotics.org/index.php?title=Tool_Manuals_and_Specifications&oldid=2003"