Difference between revisions of "Tool Manuals and Specifications"
From Deep Blue Robotics Wiki
Line 1: | Line 1: | ||
+ | [[Category:Work_On]] | ||
+ | |||
A place to store manuals and specs of all major power tools in the shop. This page is specifically constructed so fixing broken tools does not require an exhaustive search of the manual or parts. Please add to this page as new tools get added to the shop | A place to store manuals and specs of all major power tools in the shop. This page is specifically constructed so fixing broken tools does not require an exhaustive search of the manual or parts. Please add to this page as new tools get added to the shop | ||
Latest revision as of 06:23, 11 November 2016
A place to store manuals and specs of all major power tools in the shop. This page is specifically constructed so fixing broken tools does not require an exhaustive search of the manual or parts. Please add to this page as new tools get added to the shop
BOLD denotes specifications most likely needed for repair and maintenance
Problems? Contact ericliu121@yahoo.com
Contents
Jet JWBS-14CS Band Saw
Operating Instructions and Parts Manuel
Specifications | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Blade Length (in) | 93-1/2 | Minimum Blade Width (in) | 1/8 | Maximum Blade Width (in) | 3/4 | Table Size (in) | 15 x 15 | Cutting Capacity (height/in) | 6 | Cutting Capacity (width/in) | 13-1/2 | Motor | 3/4HP, 115/230V |
Jet JSG 0810 Air Riveter
Operating Manuel and Parts List
Specifications | |||||||
---|---|---|---|---|---|---|---|
Recommended Operating Pressure (psi) | 90 | Air Inlet Size (in) | 1/4 | Possible Rivet Sizes (in) | 3/32, 1/8, 5/32, 3/16 | Hydraulic Oil | 10 WT |
Delta 48ALFCCW402 Laser Drill Press
Specifications | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Speed Range (RPM) | 170-3000 | Spindle Taper | Morse #2 | Chuck Taper | Jacobs #3 | Table Size (in) | 20 x 14 | Max Drilling Capacity (height/in) | 42-1/2 | Key Chuck Capacity (in) | 5/8 | Motor | 3/4HP |
Delta 28-400 Band Saw
Specifications | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Blade Length (in) | 93-1/2 | Minimum Blade Width (in) | 1/8 | Maximum Blade Width (in) | 3/4 | Table Size (in) | 15-3/4 x 18-7/8 | Cutting Capacity (height/in) | 6 | Cutting Capacity (width/in) | 13/5/8 | Motor | 1HP, 120V |
Delta 23-197 Variable Speed Grinder
Specifications | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Wheel Diameter (in) | 8 | Wheel Thickness (in) | 1 | Wheel Grit | 36 (coarse) and 60 (medium) | Wheel Speed (RPM) | 2000-3400 | Shaft Diameter (in) | 5/8 | Motor | 5 AMP, 120V, 1-Phase |
DeWalt DW715 Compound Miter Saw
Specifications | |||||||||
---|---|---|---|---|---|---|---|---|---|
Blade Diameter (in) | 12 | Blade Arbor Hole Size (in) | 1 | Blade Minimum Speed Rating (RPM) | 4800 | Blade Type | Crosscut Blades Only! | Motor | 15 AMP, 120V, 1600W Max |
Porter Cable PCB420SA Belt/Disc Sander
Specifications | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Belt Size (in) | 4 x 36 | Belt Speed (no load-feet/min) | 2160 | Belt Worktable (in) | 6-11/16 x 4-15/16 | Disc Size (diameter-in) | 8 | Disc Speed (no load-rotations/min) | 3450 | Disc Worktable (in) | 10-25/64 x 5-29/32 | Motor | 5 AMP, 120V, 3/4HP, Induction |
Ryobi BD 4600 Belt/Disc Sander
Specifications | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Belt Size (in) | 4 x 36 | Belt Speed (no load-surface feet/min) | 1900 | Belt Worktable (in) | none | Disc Size (diameter-in) | 6 | Disc Speed (no load-rotations/min) | 3600 | Disc Worktable (in) | 8-1/2 x 5-3/4 | Motor | 4.3 AMP, 120V, 1/2HP, Induction |