Difference between revisions of "Tool Manuals and Specifications"
From Deep Blue Robotics Wiki
(→Jet JWBS-14CS Band Saw) |
|||
(10 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
+ | [[Category:Work_On]] | ||
+ | |||
A place to store manuals and specs of all major power tools in the shop. This page is specifically constructed so fixing broken tools does not require an exhaustive search of the manual or parts. Please add to this page as new tools get added to the shop | A place to store manuals and specs of all major power tools in the shop. This page is specifically constructed so fixing broken tools does not require an exhaustive search of the manual or parts. Please add to this page as new tools get added to the shop | ||
+ | |||
+ | '''BOLD''' denotes specifications most likely needed for repair and maintenance | ||
Problems? Contact ericliu121@yahoo.com | Problems? Contact ericliu121@yahoo.com | ||
Line 11: | Line 15: | ||
!colspan="2"|Specifications | !colspan="2"|Specifications | ||
|- | |- | ||
− | |Blade Length (in) | + | |'''Blade Length (in)''' |
− | |93-1/2 | + | |'''93-1/2''' |
|+ | |+ | ||
|Minimum Blade Width (in) | |Minimum Blade Width (in) | ||
Line 50: | Line 54: | ||
|3/32, 1/8, 5/32, 3/16 | |3/32, 1/8, 5/32, 3/16 | ||
|+ | |+ | ||
− | |Hydraulic Oil | + | |'''Hydraulic Oil''' |
− | |10 WT | + | |'''10 WT''' |
|} | |} | ||
Line 67: | Line 71: | ||
|170-3000 | |170-3000 | ||
|+ | |+ | ||
− | |Spindle Taper | + | |'''Spindle Taper''' |
− | |Morse #2 | + | |'''Morse #2''' |
|+ | |+ | ||
− | |Chuck Taper | + | |'''Chuck Taper''' |
− | |Jacobs #3 | + | |'''Jacobs #3''' |
|+ | |+ | ||
|Table Size (in) | |Table Size (in) | ||
Line 94: | Line 98: | ||
!colspan="2"|Specifications | !colspan="2"|Specifications | ||
|- | |- | ||
− | |Blade Length (in) | + | |'''Blade Length (in)''' |
− | |93-1/2 | + | |'''93-1/2''' |
|+ | |+ | ||
|Minimum Blade Width (in) | |Minimum Blade Width (in) | ||
Line 124: | Line 128: | ||
!colspan="2"|Specifications | !colspan="2"|Specifications | ||
|- | |- | ||
− | |Wheel Diameter (in) | + | |'''Wheel Diameter (in)''' |
− | |8 | + | |'''8''' |
|+ | |+ | ||
− | |Wheel Thickness (in) | + | |'''Wheel Thickness (in)''' |
− | |1 | + | |'''1''' |
|+ | |+ | ||
− | |Wheel Grit | + | |'''Wheel Grit''' |
− | |36 (coarse) and 60 (medium) | + | |'''36 (coarse) and 60 (medium)''' |
|+ | |+ | ||
|Wheel Speed (RPM) | |Wheel Speed (RPM) | ||
Line 151: | Line 155: | ||
!colspan="2"|Specifications | !colspan="2"|Specifications | ||
|- | |- | ||
− | |Blade Diameter (in) | + | |'''Blade Diameter (in)''' |
− | |12 | + | |'''12''' |
|+ | |+ | ||
− | |Blade Arbor Hole Size (in) | + | |'''Blade Arbor Hole Size (in)''' |
− | |1 | + | |'''1''' |
|+ | |+ | ||
− | |Blade Minimum Speed Rating (RPM) | + | |'''Blade Minimum Speed Rating (RPM)''' |
− | |4800 | + | |'''4800''' |
|+ | |+ | ||
|Blade Type | |Blade Type | ||
Line 168: | Line 172: | ||
==Porter Cable PCB420SA Belt/Disc Sander== | ==Porter Cable PCB420SA Belt/Disc Sander== | ||
+ | [[File:Porter Cable PCB420SA Belt-Disc Sander Image.jpg|x225px|left|thumb]] | ||
+ | |||
[https://drive.google.com/open?id=0B0iW3hNWLDfeYnVxdDJSRlQycHc Instruction Manuel] | [https://drive.google.com/open?id=0B0iW3hNWLDfeYnVxdDJSRlQycHc Instruction Manuel] | ||
Line 173: | Line 179: | ||
!colspan="2"|Specifications | !colspan="2"|Specifications | ||
|- | |- | ||
− | |Belt Size (in) | + | |'''Belt Size (in)''' |
− | |4 x 36 | + | |'''4 x 36''' |
|+ | |+ | ||
|Belt Speed (no load-feet/min) | |Belt Speed (no load-feet/min) | ||
Line 182: | Line 188: | ||
|6-11/16 x 4-15/16 | |6-11/16 x 4-15/16 | ||
|+ | |+ | ||
− | |Disc Size (diameter-in) | + | |'''Disc Size (diameter-in)''' |
− | |8 | + | |'''8''' |
|+ | |+ | ||
|Disc Speed (no load-rotations/min) | |Disc Speed (no load-rotations/min) | ||
Line 196: | Line 202: | ||
==Ryobi BD 4600 Belt/Disc Sander== | ==Ryobi BD 4600 Belt/Disc Sander== | ||
+ | [[File:Ryobi BD 4600 Belt-Disc Sander Image.jpg|x225px|left|thumb]] | ||
+ | |||
[https://drive.google.com/open?id=0B0iW3hNWLDfeVlJfUGV0dHpBS2c Operator's Manuel] | [https://drive.google.com/open?id=0B0iW3hNWLDfeVlJfUGV0dHpBS2c Operator's Manuel] | ||
Line 201: | Line 209: | ||
!colspan="2"|Specifications | !colspan="2"|Specifications | ||
|- | |- | ||
− | |Belt Size (in) | + | |'''Belt Size (in)''' |
− | |4 x 36 | + | |'''4 x 36''' |
|+ | |+ | ||
|Belt Speed (no load-surface feet/min) | |Belt Speed (no load-surface feet/min) | ||
Line 210: | Line 218: | ||
|none | |none | ||
|+ | |+ | ||
− | |Disc Size (diameter-in) | + | |'''Disc Size (diameter-in)''' |
− | |6 | + | |'''6''' |
|+ | |+ | ||
|Disc Speed (no load-rotations/min) | |Disc Speed (no load-rotations/min) | ||
Line 224: | Line 232: | ||
==Shop Fox M1015 Mini Lathe== | ==Shop Fox M1015 Mini Lathe== | ||
+ | [[File:Shop Fox M1015 Mini Lathe Image.jpg|x200px|left|thumb]] | ||
+ | |||
[https://drive.google.com/open?id=0B0iW3hNWLDfed1JKT0p1S0t6U2s Instruction Maneul] | [https://drive.google.com/open?id=0B0iW3hNWLDfed1JKT0p1S0t6U2s Instruction Maneul] |
Latest revision as of 06:23, 11 November 2016
A place to store manuals and specs of all major power tools in the shop. This page is specifically constructed so fixing broken tools does not require an exhaustive search of the manual or parts. Please add to this page as new tools get added to the shop
BOLD denotes specifications most likely needed for repair and maintenance
Problems? Contact ericliu121@yahoo.com
Contents
Jet JWBS-14CS Band Saw
Operating Instructions and Parts Manuel
Specifications | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Blade Length (in) | 93-1/2 | Minimum Blade Width (in) | 1/8 | Maximum Blade Width (in) | 3/4 | Table Size (in) | 15 x 15 | Cutting Capacity (height/in) | 6 | Cutting Capacity (width/in) | 13-1/2 | Motor | 3/4HP, 115/230V |
Jet JSG 0810 Air Riveter
Operating Manuel and Parts List
Specifications | |||||||
---|---|---|---|---|---|---|---|
Recommended Operating Pressure (psi) | 90 | Air Inlet Size (in) | 1/4 | Possible Rivet Sizes (in) | 3/32, 1/8, 5/32, 3/16 | Hydraulic Oil | 10 WT |
Delta 48ALFCCW402 Laser Drill Press
Specifications | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Speed Range (RPM) | 170-3000 | Spindle Taper | Morse #2 | Chuck Taper | Jacobs #3 | Table Size (in) | 20 x 14 | Max Drilling Capacity (height/in) | 42-1/2 | Key Chuck Capacity (in) | 5/8 | Motor | 3/4HP |
Delta 28-400 Band Saw
Specifications | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Blade Length (in) | 93-1/2 | Minimum Blade Width (in) | 1/8 | Maximum Blade Width (in) | 3/4 | Table Size (in) | 15-3/4 x 18-7/8 | Cutting Capacity (height/in) | 6 | Cutting Capacity (width/in) | 13/5/8 | Motor | 1HP, 120V |
Delta 23-197 Variable Speed Grinder
Specifications | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Wheel Diameter (in) | 8 | Wheel Thickness (in) | 1 | Wheel Grit | 36 (coarse) and 60 (medium) | Wheel Speed (RPM) | 2000-3400 | Shaft Diameter (in) | 5/8 | Motor | 5 AMP, 120V, 1-Phase |
DeWalt DW715 Compound Miter Saw
Specifications | |||||||||
---|---|---|---|---|---|---|---|---|---|
Blade Diameter (in) | 12 | Blade Arbor Hole Size (in) | 1 | Blade Minimum Speed Rating (RPM) | 4800 | Blade Type | Crosscut Blades Only! | Motor | 15 AMP, 120V, 1600W Max |
Porter Cable PCB420SA Belt/Disc Sander
Specifications | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Belt Size (in) | 4 x 36 | Belt Speed (no load-feet/min) | 2160 | Belt Worktable (in) | 6-11/16 x 4-15/16 | Disc Size (diameter-in) | 8 | Disc Speed (no load-rotations/min) | 3450 | Disc Worktable (in) | 10-25/64 x 5-29/32 | Motor | 5 AMP, 120V, 3/4HP, Induction |
Ryobi BD 4600 Belt/Disc Sander
Specifications | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Belt Size (in) | 4 x 36 | Belt Speed (no load-surface feet/min) | 1900 | Belt Worktable (in) | none | Disc Size (diameter-in) | 6 | Disc Speed (no load-rotations/min) | 3600 | Disc Worktable (in) | 8-1/2 x 5-3/4 | Motor | 4.3 AMP, 120V, 1/2HP, Induction |