Difference between revisions of "Tool Manuals and Specifications"
From Deep Blue Robotics Wiki
(→Jet JSG 0810 Air Riveter) |
(→Delta 28-400 Band Saw) |
||
Line 85: | Line 85: | ||
==Delta 28-400 Band Saw== | ==Delta 28-400 Band Saw== | ||
− | [[File:Delta 28-400 Band Saw Image.jpg| | + | [[File:Delta 28-400 Band Saw Image.jpg|x200 px|left|thumb]] |
[https://drive.google.com/open?id=0B0iW3hNWLDfeRTd1UXI0cThHZlE Instruction Manuel] | [https://drive.google.com/open?id=0B0iW3hNWLDfeRTd1UXI0cThHZlE Instruction Manuel] |
Revision as of 00:05, 5 September 2016
A place to store manuals and specs of all major power tools in the shop. This page is specifically constructed so fixing broken tools does not require an exhaustive search of the manual or parts. Please add to this page as new tools get added to the shop
Problems? Contact ericliu121@yahoo.com
Contents
Jet JWBS-14CS Band Saw
Operating Instructions and Parts Manuel
Specifications | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Blade Length (in) | 93-1/2 | Minimum Blade Width (in) | 1/8 | Maximum Blade Width (in) | 3/4 | Table Size (in) | 15 x 15 | Cutting Capacity (height/in) | 6 | Cutting Capacity (width/in) | 13-1/2 | Motor | 3/4HP, 115/230V |
Jet JSG 0810 Air Riveter
Operating Manuel and Parts List
Specifications | |||||||
---|---|---|---|---|---|---|---|
Recommended Operating Pressure (psi) | 90 | Air Inlet Size (in) | 1/4 | Possible Rivet Sizes (in) | 3/32, 1/8, 5/32, 3/16 | Hydraulic Oil | 10 WT |
Delta 48ALFCCW402 Laser Drill Press
Specifications | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Speed Range (RPM) | 170-3000 | Spindle Taper | Morse #2 | Chuck Taper | Jacobs #3 | Table Size (in) | 20 x 14 | Max Drilling Capacity (height/in) | 42-1/2 | Key Chuck Capacity (in) | 5/8 | Motor | 3/4HP |
Delta 28-400 Band Saw
Specifications | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Blade Length (in) | 93-1/2 | Minimum Blade Width (in) | 1/8 | Maximum Blade Width (in) | 3/4 | Table Size (in) | 15-3/4 x 18-7/8 | Cutting Capacity (height/in) | 6 | Cutting Capacity (width/in) | 13/5/8 | Motor | 1HP, 120V |
Delta 23-197 Variable Speed Grinder
DeWalt DW715 Compound Miter Saw
Porter Cable PCB420SA Belt/Disc Sander
Specifications | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Belt Size (in) | 4 x 36 | Belt Speed (no load-feet/min) | 2160 | Belt Worktable (in) | 6-11/16 x 4-15/16 | Disc Size (diameter-in) | 8 | Disc Speed (no load-rotations/min) | 3450 | Disc Worktable (in) | 10-25/64 x 5-29/32 | Motor | 5 AMP, 120V, 3/4HP, Induction |
Ryobi BD 4600 Belt/Disc Sander
Specifications | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Belt Size (in) | 4 x 36 | Belt Speed (no load-surface feet/min) | 1900 | Belt Worktable (in) | none | Disc Size (diameter-in) | 6 | Disc Speed (no load-rotations/min) | 3600 | Disc Worktable (in) | 8-1/2 x 5-3/4 | Motor | 4.3 AMP, 120V, 1/2HP, Induction |